ECO 4 x 0.78 m galvanised feed trough

Due to the aggressiveness of the lactic acid naturally present in silage, the zinc coating (Galvanised) can deteriorate. To extend the feed trough’s service life, a bituminous coating (e.g. Blackson food grade) needs to be periodically applied to the inside of the trough

Manufactured from 2 mm sheet steel bent in a single length for greater rigidity, - Angles are notched allowing the ends to be superimposed with a weld bead for more solidity,
- Anti-rust protection on the entire trough, - Polyurethane paint applied on pan interior and exterior, trough depth 30cm, legs welded under tank.
Feed troughs fitted with:
- 2 reinforcing cross bars inside the feed trough (except 3m/1 cross),
- 4 feet welded under the tray for troughs and connected by reinforcing cross bars.
- 40 mm anti-waste rim,
- Ø 50mm galvanised legs and adjustable in height in groups of 7 cm by a through bolt to adjust the height or tilt the trough to limit waste,
- 1 PVC threaded drain through wall plug (Ø 45 mm)

Eco feed trough 0.78 are designed for dairy and beef cattle, to feed them with forrage of silage. 

Hot-dip galvanizing after manufacture for protection.