Deep width 5 x 1 m reinforced painted feed trough

- Manufactured from 2 mm sheet steel bent in a single length for greater rigidity,
- Angles are notched allowing the ends to be superimposed with a weld bead for more solidity,
- Anti-rust protection on the entire trough,
- Polyurethane paint applied on exterior pan,
- Bituminous coating applied on interior pan,
- Very deep trough, 
Reinforced painted feed troughs are fitted with:
- 2 reinforcing cross bars inside the feed trough,
- 4 welded feed linked by cross bars under the feed trough pan up to 5 m and 6 feet for 6 m,
- Anti-spillage rim’s width of :
• 75 mm for any troughs width from 0.80 to 1.50 m
• 55 mm for troughs width 0.60 m
- Ø 50 mm galvanised legs for any troughs width from 0.80 to 1.50 m and Ø 42.4 for any troughs width 0.60 m. Adjustable in height in groups of 7 cm by a through bolt to adjust the height or tilt the trough to limit waste,
- 4 reinforcing triangular armpits between the foot and the pan to increase overall stability and solidity
- 1 PVC threaded drain through wall plug (Ø 45 mm).

Reinforced painted feed troughs are available in various widths (Total width): 0.60; 0.80; 1; 1.20, and 1.50 m.
They are designed silage and feed for cattle.

Large width reinforced feed troughs are also fitted with:
- 1 central cone reinforcing the bottom and improving silage intake for models of a width of 1.20 and 1.50 m.