"ISOPROTEC" PE for posts Ø 76 mm
"ISOPROTEC" PE full covers for stall posts meet a primary need in cattle housing structures.
The protective zinc deposited by hot galvanisation on the tubular support posts degrades more or less quickly over time.
This zinc, attacked by the acids present in the slurry and by the magnetic fields of livestock buildings (more or less well grounded), disappears over time resulting in rust which can destroy the post.
To date, there are no solutions on the market to achieve perfect sealing between the posts and the floor or the interlocking sleeves in which they are slotted. Infiltrations always end up corroding the posts over time.
"ISOPROTEC" PE full covers offer perfect sealing. They are made of one-piece rotomolded PE, which is much less brittle than injection, and has a flexible seal at the top.
This protection can be slotted onto round ø76 Cosnet posts to be embedded.
It offers the possibility either of sealing directly in the concrete or of being slotted into a PE "ISOPROTEC" socket to be embedded in the ground to make them removable during cleaning.
Patented "ISOPROTEC" round PE covers can be used in two ways:
- they can be directly embedded in the concrete thus providing a watertight sleeve for the galvanised post
They can also be used with "ISOPROTEC" sockets, thus making the assemblies removable during cleaning.
Delivered with seal.
- Material
- polyethylene resin
- Diameter
- 92 mm
- Net weight
- 1.8 kg
- Packaging
- Pallet
- Total height
- 665 mm
- Height to embed
- 365 mm
- Sales unit
- Unit